Your Harvok caravan is equipped with:
1. Water Tank Fill Inlet
- Used to manually fill your onboard fresh water tanks.
- Located on the exterior of the caravan, typically labeled “Water Fill.”
- Connect a hose to fill tanks before a trip or when stationary without mains water.
- The fill point connects directly to the tanks, and overflow may occur once full — this is normal.
2. Mains Pressure Inlet
- Designed to connect your caravan directly to a pressurised town water source.
- Typically marked with “Mains Water” or “City Water Connection.”
- Equipped with a built-in pressure limiting valve (350kPA) to protect the plumbing system inside the caravan.
- This inlet allows water to bypass the tanks and feed directly into the caravan’s plumbing system.
Important: Always use a food-grade hose to supply clean water and avoid unpleasant taste or contamination.
How They Work Together:
- Tank Fill Inlet is for water storage. Use this if you plan to use water while travelling or staying off-grid.
- Mains Inlet is for direct use when connected to a campsite or household water tap — no need to rely on tank storage in this mode.